|
Frame
| Part | Part # | *Bumper, Expedition. Unique, heavy
duty. Impact-absorbing design
carries approximately 4
quarts of motor oil, or twin-chamber model
carries both
motor oil and 90 weight lubricants. Extra-rugged bumper
appears similar to original factory equip[tment, but is 2-3
times stronger.
For use with Fairey Ground Anchors | 564704EXP | | | | | Bumper, Front, galvanized | 564704 | | Bolts securing bumper | 256253 | | | | | Bumper, Front,
Military Heavy duty reinforced, with overriders | 508049 | | | | | Bumper, Front, extra
heavy duty FAIREY | 564704HD | | | | | Bumper Overriders,
Protect front fenders.
Galvanized PAIR | 552074 | | | | | Bumperettes, Rear,
Protect rear body from damage | LRP28 | | | | | Cross Member, Front with horns | LRP59 | | | | | Cross Member, Rear Frame | | | Standard model. Can
be shipped UPS | LRP10 | | With integral frame extensions. Must
be shipped by truck | LRP27 | | Separate extensions for rear
cross member to strengthen and reinforce main frame rails PAIR | LRP29 | | | | | Firewall Outrigger | LRP6 | | | | | *Floor Repair Plates,
Stainless Steel, Precision-manufactured, heavy-gauge
panels fit all Series II, IIa, and III Land Rovers, 88"
and 109". Both in place with existing factory
fastenings. Fit with fiberglass-reinforced mastic for
best results. Proven design, stronger than original
floors, in use nation-wide for over 20 years PAIR | SFRP4C | | | | | Frames and Firewalls,
Rust-free West Coast frames for the 88" & 109",
at considerable savings from new. Absolutely top-quality.
Supplied as-is, sandblasted & primed, or galvanized (either
cold or hot dipped) to your order. Firewalls are also
available for Series IIa, and Series III models. Please
call for prices. | | | | | | Frame Horns, with
spring hangers | LRP57 | | | | | Fuel Tank Support,
Front | | | Right hand | LRP54 | | Left hand | LRP55 | | | | | Fuel Tank Support,
Rear, right or left | LRP7 | | | | Repair Extension, for
repair and for strengthening main frame rails at rear
cross member State 88" or 109 PAIR | LRP29 | | | | | Repair Kit, for main
frame rails. Carefully constructed for ease of
installation. | | | For 88" | BNW88 | | For 109" | BNW109 | | | | | Spring Hanger, Rear,
for 88" | LRP44 | | | | | Spring Support | | | Front of rear spring, 109" | LRP8 | | Rear of rear spring, 109" | LRP56 |
Back
To Parts Catalog Index
HOME
|