|
Tools
*Engine Enamel. For complete
authenticity protect your Land Rover engine with our
original factory color engine enamel. Brush or spray on. Pint | RTC1238 | | | | *Galvanizing Paint,
This high quality coating is ideal for its corrosion-inhibiting
ability.
Extremely tenacious, durable, easy to apply. Exceeds
Federal salt spray tests for
hot-dip galvanizing! Spray paint is excellent for
touching up minor rust on galvanized
surfaces. Bulk paint is unbeatable for brush or spray
application to highly vulnerable
areas such as firewall and frame. | | | 12 oz. spray | SG101 | | Quart | BQG1 | | Gallon | BGG1 | | | | Hammertone Paint, Originally used on air cleaner,
valve cover breather, etc....12 oz spray | HAM1 | | | | *Land Rover Rustproofing Kit,
Phenomenally effective preparation is inexpensive yet
easy to apply under virtually all conditions and in any
season. Requires no special equiptment. Saves frames,
firewalls, doors, brake pipes, bleed screws, and wiring.
If all Land Rovers had been treated with our rust-proofing
from new, there would be none abandoned because of rust
today! Sold in bulk, with hand pump sprayer.
Gallon | RSK109 | | | | | Center Seat Tool Tray, Originally
fitted to 6 cylinder and diesel models. Available in
limited quantities to fit all models. Locates easily
under center seat. Genuine ROVER lockable tool or
valuables compartment. Please state 4 or 6 cylinder
engine. | | | New | 336512 | | Second Hand | 336512SH | | | | | Clutch Disk Aligning Arbor | CDAA1 | | | | *Drain Plug Tool, Use
with your 1/2" ratchet or breaker bar.
Special wrench easily removes all recessed-slot brass
drain plugs in the axles, transfer case, fuel tank, etc | DPT1 | | | |
Mechanic's Note: When removing exceptionally stubborn drain plugs,
place the Land Rover screw jack under the drain plug tool
and apply
sufficient upward pressure to prevent the tool from
"walking" out of the slot | | | | *Girling Diagnostic Brake Hose Clamp,
Is your brake problem due to trouble
in the mechanical or hydraulic area? The master cylinder
or the slave cylinder?
Use this helpful tool to "divide" the system
and determine where to look for trouble.
Invaluable | GHC88/109 | | |
Spanners, Wrentches and
Socket Sets
Spanner and Socket Sets,
British Whitworth, Land Rovers are fitted
with many
Whitworth nuts and bolts, especially on the gearbox,
electrical
components, carburetters, tie rods, and body
panels. Many Whitworth
and British Standard Fine (BSF)
wrentches have no metric or SAE equivalent. | | *Box End Spanner Set, Made in England.
Chrome. 3 pieces in the following
Whitworth sizes:
1/8, 3/16, 1/4, 5/16, 3/8 |
WWS103 | *Box/Open End Combination Spanner Set
in pouch. Chrome.
5 pieces in the following Whitworth
sizes:1/8, 3/16, 1/4, 5/16, 3/8 |
WWS101 | *Combination Spanner Set, High quality
combination spanner drop forged
of chrome vanadium tool
steel. 1/8" to 1/2" Whitworth. Set of seven
spanners in pouch.
LIFETIME WARRANTY |
AWS7 | "KICK DICK" 4 piece open end
spanner set. Made to very high specification.
Chrome vanadium steel. Made in England | KDSS12
WWS107 | | | | *Open End Utility Spanner Set, Black
finish. Made in England.
5 pieces in the following
Whitworth sizes:
3/16, 1/4, 5/16, 3/8, 7/16, 1/2 |
WS102 | | | | | *Socket Set Chrome,
Very good quality and finish |
| 9 pieces. 1/2 drive, 12 point, in the
following Whitworth sizes:
1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 |
WWS106 | | | | *Wrench, Lug, Premium model.
Wonderfully unique design allows extra leverage when
loosening lug nuts, but
prevents over-tightening. Magnificently simple! British
ingenuity at its very best! | | | *Series IIa |
537179 | | Series III |
NRC1315 | | | | Wrench, Spindle Hut,
Heat treated, for adjusting wheel bearing nuts.
Fits 1/2" drive wrentches |
90217335W | Tool Rolls. Genuine,
original-equiptment tool kits in factory pouch.
State year when asking fopr price |
219704K |
Note: We also have BSF, BA and
Whitworth taps and dies available.
Back
To Parts Catalog Index
HOME |